NDB3-50 is a hydraulic-magnetic circuit breaker for equipment, designed to protect AC and DC control circuits against overload and short circuit. Its modular options support a wide range of equipment and installation requirements.
| Rated Current | 0.5–50 A typical |
|---|---|
| Rated Voltage | DC 80 V; AC 250 / 415 V |
| Poles | 1, 2 or 3 |
| Tripping Type | Hydraulic-magnetic |
| Mechanical / Electrical Life | 10,000 / 6,000 operations |
| Standards | IEC 60934, EN 60934, UL 1077, UL 489 / 489A |
Solo configuración típica. Las potencias nominales definitivas se confirman en función de los requisitos del proyecto.
Used in industrial automation, telecommunications, UPS equipment, rail, marine, aerospace, elevator-control and mobile-power systems.
NDB3-30 is a compact hydraulic-magnetic circuit breaker for equipment, covering low-current AC and DC circuits. It provides overload and short-circuit protection with configurable delay curves and actuator options. Typical configuration only. Fin...
Ver detalles
NDM3EU-225 is Electronic Mold Case Circuit Breaker which is satisfied UL489。The product is developed for the North America market demand,and it meets the UL489 standard molded case circuit breaker product.The rated insulation voltage of the produ...
Ver detalles
Applications: The NDG3V-250~800 series switch-disconnectors are applicable to electric systems with a rated voltage up to DC 1500V and a rated current up to 800A. It can be used for infrequent close and open, it provides isolation and breaking ...
Ver detalles
Circuit Breaker Applicab1e scope and purpose NDB6AZ-63H series circuit breakers products are mainly used in telecommunications equipment rooms or communication cabinets,as isolation,short circuit and overload protection f...
Ver detalles
Categorías destacadas
Enviar una consulta sobre un producto
Nos pondremos en contacto con usted en un plazo de 24 horas.